Site Map ! Email ! Suggestion ! Edicent Login

Product Certification:

CE Marking:

By introducing the CE marking into its legislation, the EU has developed an innovative instrument to remove barriers from the circulation of goods and to protect public interest. Existing in its present form since 1993, the CE marking is a key indicator of a pand enables the free movement of products within the European market. By affixing the CE marking on a product, a manufacturer is declaring,  , conformity with all of the legal requirements to achieve CE marking, and is therefore ensuring validity for that product to be sold throughout the (EEA– the 27 Member States of the EU and EFTA countries, Iceland, Norway, Liechtenstein). This also applies to products made in third countries which are sold in the EEA. CE marking does not indicate that a product was made in the EEA, but merely states that the product is and thus satisfies the legislative requirements (e.g. a harmonised level of safety) to be sold there. It means that the manufacturer has verified that the product complies with all relevant  (e.g. Safety, health, environmental protection requirements) of the applicable directive(s) – or, if stipulated in the directive(s), has had it examined by a notified conformity assessment body. However, not all products must bear the CE marking. Only those product categories subject to specific directives that provide for the CE marking are required to be CE marked. CE marked products are bought not only by professionals (e.g. medical devices, lifts, machinery and measuring equipment) but also by consumers (toys, PCs, mobile phones and light bulbs).

E Marking:

The E/ e Mark is also a European common market, to the vapour. Zero accessories products, noise and waste gas etc. of motorcycle and its safeties, all need according to the EU ordinance the EEC Directives with European economic committee laws the ECE Regulation of provision, meet the attestation request through a product, then give to the qualified certificate, to insure the request of the safety and the environmental protection of go the car. The E- Mark depend on the attestation country and do not be different, is also different the serial number that give to, for example put forward the application toward Luxembourg, its E- Mark marking is an E13/ e13. Apply the scope of the product the whole car namely two rounds or more than three electrical engineering move the pileup, such as the passenger car, truck, motorcycle, bus and vehicle out of the roads. The vapour motorcycle components lamp and lamp bulb, various see the mirror, tire, a turn, car of , trumpet and guard against theft equipment’s, safety belt, the automobile glass and line up windpipe etc. The vapour motorcycle zero subsidiary electric appliances product etc. inside the safe chair, car of accessories safety helmets, Childs Since October of 2002, rule all vehicles, zero parties of vehicle, and used for the electronics on the car product's must execute forcibly the test of EMC. All electronics zero parts beards that sells in Europe unify to match the EMC instruction 95/54/ EC, carrying on according to the EMC instruction 89/336/ EEC of announce by one's own will no longer valid. But be authorized the vehicle product by the EU to announce the organization to have the certificate of E/ e Mark. Also is to say, the CE (EMC) attestation that the vehicle electronics and electronics zero parties at first apply for will be no longer valid since October of 2002. Must re- apply for the E/ e Mark certificate rear that the transportation section of the European nation have and can be in the European market sale. Europe for the whole car of mobile car and involve the request that zero parts and systems of the safety contain safe attestation, the concrete body symbolizes to symbolize the attestation with e for the E now. The laws (Regulation) that marking of E comes from the European economic committee (the Economic Commission of Europe, the brief name ECE) promulgation the ECE includes 28 nations of Europe.

UL Marking:

UL is one of several companies approved to perform safety testing by the US federal agency Occupational Safety and Health Administration (OSHA). OSHA maintains a list of approved testing laboratories, which are known as Nationally Recognized Testing Laboratories.

ISI Marking:

Presence of ISI certification mark, known as Standard Mark, on a product is an assurance of conformity to the specifications. The conformity is ensured by regular surveillance of the licensee's performance by surprise inspections and testing of samples, drawn both from the market and factory. The manufacturer is permitted to self certify the licenced products after ascertaining its conformity to the Standard. Through its surveillance operations, the Bureau maintains a close vigil on the quality of certified goods. Although, the scheme itself is voluntary in nature, the Government of India, on considerations of public health and safety, security, infrastructure requirements and mass consumption has enforced mandatory certification on various products through Orders issued from time to time under various Acts. While BIS continues to grant licences on application, the enforcement of compulsory certification is done by the notified authorities. Under separate arrangements with Statutory agencies, some products have been placed under special certification schemes of lot or batch inspection carried out by BIS Inspecting officers. A majority of gas cylinders, regulators and valves are certified through such schemes. In order to safeguard the interest of consumers against spurious marking/misuse of ISI mark, penal provision exists in BIS Act 1986 under section 33(1), as per which any person who contravenes the provisions of Section 11, Section 12, Section 14 or Section 15 shall be punishable with imprisonment for a term which may extend upto one year or with a fine which may extend upto Rs. 50,000 or with both.

VDE Marking:

The VDE is the Association for Electrical, Electronic and Information Technologies and their related sciences, technologies and applications. As the voice for these key technologies in Germany, the VDE works to foster a better climate for innovation, ensure the highest safety standards, promote optimal engineering curricula, and encourage a broader public acceptance of new technologies. The Association’s organization and functions are unique worldwide: The VDE combines a broad spectrum of scientific activities with work on industry standards and product testing under one roof. Focal points of VDE’s work include developing safety standards for electrical and electronic products, preparing technical regulations as national and international standards, and testing and certifying electrical products, equipment and systems. The VDE Testing and Certification Institute Germany, is among the world’s most prominent independent testing organizations for electric and electronic products. At the Institute’s global network of testing and certification centres, over 500 highly qualified employees conduct around 100,000 tests annually for national and international manufacturers. Virtually every electrical product used daily by the public in Germany and elsewhere – ranging from electric toothbrushes to stoves, washing machines and IT products – is tested and certified by the Institute. The VDE mark, familiar to 68 percent of the German public, is considered to be the symbol of highest safety standards. Worldwide, around 200,000 products bear the respected VDE mark.

Green Guard Marking:

REENGUARD Certification is part of UL Environment, a business unit of UL (Underwriters Laboratories). GREENGUARD Certification helps manufacturers create--and helps buyers identify--interior products and materials that have low chemical emissions, improving the quality of the air in which the products are used. UL Environment acquired GREENGUARD in 2011, further advancing its mission of promoting global sustainability, environmental health, and safety.

FSC Certification:

FSC uses the power of the marketplace to protect forests for future generations. Some people feel the best way to prevent deforestation is to stop using forest products. In reality, people use forest products every day. For example, the average American uses nearly six trees worth of paper each year. So FSC harnesses market demand to ensure forests are responsibly managed. Because FSC is the gold standard in forest certification, it is the only system supported by groups such as WWF, Sierra Club, Greenpeace, Natural Resources Defence Council and National Wildlife Federation. Today, more than 380 million acres of forest are certified under FSC’s system, including more than 150 million acres in the US and Canada.

CCC Marking:

China has integrated its two compulsory inspection systems, one to check contents of products for import and export, and the other for quality control, into a single procedure as part of its commitment for entry into the World Trade Organization. Since May 1, 2002, two symbols used by the two systems, namely "CCIB" (Safety Mark, introduced in 1989 and required for products in 47 product categories) and "CCEE" (also known as "Great Wall" Mark, for electrical commodities in 7 product categories), have be unified and replaced by the symbol "CCC" (China Compulsory Certificate).

FSC Certification:

The FCC Declaration of Conformity or the FCC label or the FCC mark is a certification mark employed on electronic products manufactured or sold in the United States which certifies that the electromagnetic interference from the device is under limits approved by the Federal Communications Commission. The FCC label is found even on products sold outside the US territory, because they are either products manufactured in the US and had been exported, or they were manufactured in other nations which have US as a prime market (e.g.: Japan, China). This makes the FCC label recognizable worldwide even to people to whom the name of the agency Federal Communications Commission is not familiar.

Gost-R/CUTR Marking:

Certifies quality of actually supplied goods and their compliance with contractual terms. A quality certificate contains a profile of goods or confirms their compliance with certain standards or specifications of a delivery order. A certificate of compliance is intended for certification of goods produced by Russian companies or shipped to Russia by an importer-company. A certificate of compliance can be issued for a batch of goods and on a series production. In the former case a certificate is legalized for a company engaged in supplying goods to the Russian market. Its validity varies with terms of a sale contract. In the latter case a foreign manufacturer of supplied goods is both an applicant and a recipient of a certificate. This type of a certificate is valid for a period identified in a certification document. Certification is carried out by our specialists on production premises of a company seeking certification of goods it manufactures. On the basis of results obtained during testing samples of goods in a laboratory an appropriate certificate of series production compliance is issued. There are cases where GOST certificate is issued when documents like: a hygienic report, a veterinary certificate, fire safety certificate, etc. are available. These all mean that we must receive all these documents for you before.

BRC Marking:

BRC Global Standards is a leading safety and quality certification program, used by over 22,000 certificated suppliers in 123 countries, with certification issued through a worldwide network of accredited certification bodies. The Standards guarantee the standardisation of quality, safety and operational criteria and ensure that manufacturers fulfil their legal obligations and provide protection for the end consumer. BRC Global Standards are now often a fundamental requirement of leading retailers.


The Food and Drug Administration (FDA or USFDA) is a federal agency of the United States Department of Health and Human Services, one of the United States federal executive departments. The FDA is responsible for protecting and promoting public health through the regulation and supervision of food safety, tobacco products, dietary supplements, prescription and over-the-counter pharmaceutical drugs (medications), vaccines, biopharmaceuticals, blood transfusions, medical devices, electromagnetic radiation emitting devices (ERED), cosmetics, animal foods & feed and veterinary products.


The American Petroleum Institute (API) is the only national trade association that represents all aspects of America’s oil and natural gas industry. The members of API are dedicated to continuous efforts to improve the compatibility of their operations with the environment while economically developing energy resources and supplying high quality products and services to consumers. The US Youth Committee (USYC) to the World Petroleum Council (WPC) was formed to strengthen the impact both young professionals and university students can have in developing solutions to global energy issues. The USYC hosts events to enable conversations among youth with a passion for the industry.